10 Zones Lead Free Reflow Oven Machine for SMT Production Line RF-1010I
Features of Reflow Oven Equipment
1. The digital control system adopted with PLC+Modular Circuit to stabilized and accurate of repetitive precision.
2. Temperature monitoring system to check each zone temp. every second, and auto cut off the power of heater when it over setting temperature .
3. Flat rails with special treatment can ensure no deforming
Automatic lubrication system
4. Unique Mirco-circulation Heating Module to make the heat transferring more uniform and efficient
5. Excellent soldering profiles can deal with various lead free process
6. Module design heating system
7. High quality blower motors provides good heat transferring.
8. N2 flow meter, precisely and credibility
9. Top and bottom cooling modules work together with adjustable air speed to get good cooling rate.
Other information of Reflow Oven Equipment :
Center Support :No mesh available if choosing center support.
Dual Lane : Front and rear rails are fixed, center rails are adjustable.
Nitrogen Ready : Including Nitrogen piping, hemertic configuration and N2 flow meter.
Nitrogen system : just add oxygen analyzer and water chiller against above N2 ready.
Nozzle Plate : Micro-circulation hot air.
Parameter Table of Reflow Oven Equipment RF-H1010I
| 10 Zones Reflow Oven | RF-H1010I |
| Heating Zone Length | 3632mm |
| Running / Starting Power | 11 / 37 kw |
| Temp Range | Room Temperature ~ 320C |
| Temp Deviation | ± 2C |
| PCB Width | 50 - 400mm ( or customized ) |
| Cooling Zone length | 600 mm |
| Conveyor Speed | 20-1500 mm/min |
| Mesh Belt Width | 460mm ( or Customized ) |
| Machine Dimension | 5850*1490*1510 mm |
| Cooling Type | Forced-air Coooling |
| Control | PLC + PC |
| Conveyor Type | Chain and Mesh Belt |
| Parts Height | On Baoard 35mm / Under Board 20mm |
| Weight | Approx.2500 kg |
Control System of Reflow Oven Equipment
Conveyor Rail of Reflow Oven Equipment
RFQ of Reflow Oven
We have power limited in factory, how we can use your reflow oven, and avoid over-load trip when start up the machine ?
According to actual situation, we can make changes on machine software, and when start up the machine, the heating zones will be heated on one by one, it means the start up power is very low, so it will be no problem; also the customer can operate the reflow oven by manual mode, it’s very easy to set all parameters in the software;
How can we connect the reflow oven with other SMT equipment in SMT line?
We equipped SMEMA in/out interface on reflow oven, which is convenient for connecting with pick & place machine, buffer conveyor, loader/unloader, or other SMT equipment;
Product Tags:
|
|
Ten Zones Lead Free Reflow Oven Machine For SMT Production Line Images
|
